Kinect V2 Configuration Veryfier Tool

KinesicMouse forum
Post Reply
User avatar
alexanu
Posts: 11
Joined: Fri Jan 20, 2017 9:04 am

Kinect V2 Configuration Veryfier Tool

Post by alexanu »

it shows this
Untitled.jpg
I have not connected kinect yet but This means kinect will work?
User avatar
Xcessity
Site Admin
Posts: 284
Joined: Sat May 16, 2015 2:23 pm
Location: Graz
Contact:

Re: Kinect V2 Configuration Veryfier Tool

Post by Xcessity »

Hi,

yes, the tool will always mark the "USB Controller" with an orange exclamation mark. It does not tell if the Kinect V2 is really compatible with the installed USB chipset or not. There is no real confirmation until you connect the actual Kinect camera.
The other points look good though, so it looks good that the Kinect will work as intended.

Best,
Markus
User avatar
alexanu
Posts: 11
Joined: Fri Jan 20, 2017 9:04 am

Re: Kinect V2 Configuration Veryfier Tool

Post by alexanu »

My motherboard is msi h97 pc mate intel chipset is it combatible becoz its intel?
User avatar
Xcessity
Site Admin
Posts: 284
Joined: Sat May 16, 2015 2:23 pm
Location: Graz
Contact:

Re: Kinect V2 Configuration Veryfier Tool

Post by Xcessity »

Very difficult to tell, it really depends on the installed USB chipset. Usually the newer motherboards are compatible. If the USB ports from the motherboard don't work with the Kinect, you can always use an USB 3.0 PCI extension card. They are very cheap (< 15USD) to get.
Post Reply